Mô tả
Honeywell’s FSL100 range of Light Industrial/Commercial Flame Detectors enables simple coverage of fire hazard areas across many fire hazard applications. Installation, set-up and operation are simple. Wide solid area coverage and fast speed of response omtimize safety. With inbuilt automatic test and test lamps available to cover all models, reliability is ensured.
Product Overview:
The newest Optoelectronic flame detector for a wide range of Light Industrial fire detection from Honeywell Analytics.
A range of middle market Optical Flame Detectors joining the HA FSX High End products. Addresses a wide range of fire protection applications both indoors and outdoors. With 3 versions to cover a wide range of flaming fires: Ultraviolet (UV), Ultraviolet/Infrared (UV/IR) and Triple Infrared (IR3).
Detects wide range of Hydrocarbon & Non-Hydrocarbon firesDetecting a wide range of Hydrocarbon and Non-Hydrocarbon flaming fires means that many application areas can be addressed.
Wide viewing angle
Optical detection of radiant energy in a solid angle Field of View enables coverage of a large risk area. Simple optional mounting bracket allows the FSL100 to be installed and aligned covering the hazard.
Fast response
Far faster than other technologies, by responding to flaming fires in seconds enabling a more rapid response to danger before the fire can escalate.
FM Class1, 2 & 3 Div2
Can be installed indoors or outdoors and in Hazardous areas typically looking into a Div 1 area from a distance.
FM 3260 performance cert
Certified to FM 3260 for flame Detector performance.
Relay and current output (Fault and Alarm)
Analog stepped output and Alarm/Fault relays for simple connectivity.
Inbuilt Automatic Test and Simple to use Test Lamps
FSL100 maintains continuous internal health monitoring. Test lamps enable simple operational and Field of View testing.
Features & Benefits:
- UV, UV/IR and IR3 Flame Detectors to cover a wide range of applications
- Robust, simple to install & set-up: Wide angle and fast speed of response
- Automatic test and test lamps for simple check and maintenance.
Quick Specs:
- FSL100 Flame Detectors – UV, UV/IR and IR3 for light industrial applications
- GRP Housing, available in Red or White with optional swivel mount
- 12-14Vdc, 25mA nominal operation
- 4 to 20mA and Relay outputs.
Tech Specs:
| FSL100 Flame Detector Types | FSL100-UV FSL100-IR3 FSL100-UVIR Choice of red or white housings |
| Range | FSL100-UV/25m FSL100-IR3: 35m/110ft FSL100-UVIR: 80ft alarming within 10 seconds to a 0.1m2 (1 ft2) n-heptane fire |
| Cone of Vision | 90˚ minimum horizontal and vertical |
| Local LEDs | Continuous green: normal operationContinuous yellow: faultFlashing yellow: fault and guide to repeat self-test after a self-test failureContinuous red: alarm |
| Current Output | Standard available 4–20mA (stepped, sinking, non-isolated)0mA power fault/microprocessor fault2mA optical fault4mA normal operation>20mA alarm |
| Relay Output:– Alarm relay– Fault relay | De-energized during normal operation, no alarm, SPDT, 30VDC – 2A, 60W max. Energised during normal operation, nofault, SPDT, 30VDC – 2A, 60W max. |
| Cable Gland & Terminals | Cable entry M20 clearance. Supplied with a gland suitable for cable diameter from 5.5mm (0.2”) to 13mm (0.5”). Terminalssuitable for 0.5mm2 (20AWG) to 1.5mm2 (15AWG) wire |
| Start up Times | <10 sec |
| Alarm Response Time | 8 to 30 sec |
| Alarm Output Settings | Selectable LEDs and relays latching/non-latching; factory setting: latching |
| Automatic & Manual Self-Test | Automatic sensor test (built in self-test) and manual self-test |
| Operating Current Normal | 25mA at 24VDC |
| Current in Alarm, at 24 VDC | ±75mA at 24VDC |
| Connections to | Fire control panels using end-of-line (EOL) and alarm resistors (current increase)Devices that operate via relay switched outputsPLCs with 4–20mA inputs |
| End-of-Line and Alarm Resistor | To be adjusted to the fire control panel; free terminals are dedicated to the resistors Note: the alarm and EOL resistor must be rated 2W min. each and the total power dissipation of both alarm and EOLresistor should not exceed 2W |
| Housing | Glass Reinforced Polyester (GRP), Non-incendive. UV resistant, Self-Extinguishing V–0 (UL-94) |
| Swivel Mount | PA66, UV resistant; Stainless Steel fixings; 280g (0.62lb) |
| Pressure Compensating Element | PCE (Pressure Compensating Element) avoids moisture build-up in the detector housing due to changes in ambient air pressure |
| Dimensions | 125 x 80 x 57mm (4.9 x 3.15 x 2.25in ) |
| Weight | 465g (1.05lb) |
| Ingress Protection | IP65 |
| Temperature, Operating | –40˚C to +70˚C (–40˚F to +158˚F ) |
| Temperature, Ambient ATEX and FM Class 3611 | –25˚C to +70˚C (–13˚F to +158˚F ) |
